HIKVISION DS-2CE70DF3T-PTS 2MP ColorVu Indoor Audio Fixed PT Camera

• High quality imaging with 2 MP, 1920 × 1080 resolution
• 24/7 color imaging with F1.0 aperture
• Clear imaging against strong back light due to 130 dB true WDR technology
• 3D DNR technology delivers clean and sharp images
• Fixed focal lens, 2.8, and 3.6 mm optional
• Up to 20 m white light distance for bright night images
• High quality audio with audio over coaxial cable, built-in microphone
• Image Sensor2 MP CMOS
• Max. Resolution1920 (H) × 1080 (V)
• Min. Illumination0.0005 Lux @ (F1.0, AGC ON), 0 Lux with white light
• Shutter TimePAL: 1/25 s to 1/50,000 s;NTSC: 1/30 s to 1/50,000 s
• Day & Night24/7 Color Imaging
• Angle Adjustment

• Pan: 0 to 350°, tilt: 0 to 75°

  *DO NOT adjust the angle of the main body or enclosure manually.

• Signal SystemPAL/NTSC
• Slow ShutterMax. 16 times
• Image SettingsBrightness;Contrast;Mirror;Sharpness;Anti-Banding;Saturation;AGC
• Frame RateTVI: 1080P@25 fps/30 fps
• Day/Night ModeColor
• Wide Dynamic Range (WDR)≥130 dB
• Image EnhancementBLC;HLC;Global;HLS
• Privacy Mask4 programmable privacy masks
• Noise Reduction3D DNR/2D DNR
• White BalanceAuto/Manual
• White LightAuto/Off
• Interface
• Video Output1 HD analog output
• AlarmSolid Light Alarm (White Light)
• Built-In MicrophoneYes
• Event
• Motion Detection4 programmable motion areas
• General
• Power

• 12 VDC ± 25%, max. 7.4 W

  *You are recommended to use one power adapter to supply the power for one camera.

• MaterialPlastic
• MaterialPlastic
• DimensionØ123.7 × 110.8 (4.9" × 4.4")
• Approx. 290 g (0.6 lb.)
• Operating Condition-10 °C to 40 °C (14 °F to 104 °F). Humidity 90% or less (non-condensing)
• CommunicationHIKVISION-C
• LanguageEnglish

• Please follow the steps below to call the menu. NOTE: The menu description part is for your reference only. It might have some differences due to the specific model that you have. Steps: 1. Connect the camera with the TVI DVR, and the monitor, shown as the figure 3-1. Camera TVI DVR Monitor Figure 3-1 Connection 2. Power on the camera, TVI DVR, and the monitor to view the image on the monitor. 3. Click PTZ Control to enter the PTZ Control interface. 4. Call the camera menu by clicking button, or call preset No. 95.

Please follow the steps below to call the menu. NOTE: The menu description part is for your reference only. It might have some differences due to the specific model that you have. Steps: 1. Connect the camera with the TVI DVR, and the monitor, shown as the figure 3-1. Camera TVI DVR Monitor Figure 3-1 Connection 2. Power on the camera, TVI DVR, and the monitor to view the image on the monitor. 3. Click PTZ Control to enter the PTZ Control interface. 4. Call the camera menu by clicking button, or call preset No. 95.